Ostan Locksmiths, Vehicle Key Specialists
Car Key Cutting Melbourne
Spare car keys cut and coded at your vehicle, across greater Melbourne
Car and Motorcycle Key Requests
Tell Us Your Vehicle and Get a Quote
About Ostan Locksmiths
Car Key Cutting Melbourne, Done at Your Vehicle
Ostan Locksmiths handles car key cutting Melbourne wide, at the vehicle rather than over a counter. Spares are copied from a working key, or cut from the lock itself when no original survives.
- Spares copied from a working key while you wait
- Blades cut from the lock when no original exists
- Transponder chips coded to the immobiliser after cutting
- Laser and edge-cut blades for most makes and model years
- Proof of ownership checked before any key is cut
A spare can be copied from a working key in minutes, or cut from the lock itself when no original survives. Either way the job happens where the car is already parked.
Cutting and Coding
Does a Newly Cut Key Also Need the Chip Programmed?
Cutting shapes the metal so the blade turns the ignition barrel. Programming teaches the immobiliser to accept the chip inside the key. On any car built with an immobiliser you need both, or the key turns and the engine still will not start.
- Cutting and coding done in the same visit
- Immobiliser-equipped cars need both steps
- Pre-immobiliser vehicles need the cut only
We carry the cutting machine and the coding equipment together, so the key leaves working rather than half finished. Older vehicles with no immobiliser only need the cut.
Related Services
Other Vehicle Key Services We Cover
Automotive Locksmith Melbourne
The full car service in one place: lost keys, spares cut and coded, remotes, lockouts and ignition barrels for cars, utes and vans.
Car Key Programming
Transponder, remote and proximity smart keys paired to your immobiliser on site, with lost keys cleared from the vehicle.
Car Remote and Key Fob Replacement
A remote that has stopped talking to the car is often a flat cell or a worn button. We test, replace and re-pair at the kerbside.
Lost Car Keys and Lockouts
Keys shut in the boot, or gone altogether? We open the vehicle without damage and originate a new key on the spot.
Motorcycle Locksmith Melbourne
The full bike service: lost sets, cut and coded spares, chipped keys, ignition barrels and steering locks for every machine.
Plan Ahead
A Spare Cut Today Costs a Fraction of a Lost Key Callout
The cheapest key you will ever buy is the one you order while the original still works. Copying a working blade skips the decoding and the all-keys-lost procedure entirely, which is where most of the cost sits.
- Copying a working key is the quickest job we do
- All-keys-lost needs the key originated from the vehicle identification number
- A second key removes the tow truck from the equation
- Worth doing before a long trip or a new driver in the family
- Quoted from your registration before we drive out
Where We Work
Suburbs We Cover From Richmond
Richmond is the base and greater Melbourne is the service area. These are the suburbs we are called to most often, each with its own page.
Why Choose Ostan Locksmiths
Six Reasons Melbourne Drivers and Riders Call Us
Vehicles Only
Cars, utes, vans and motorcycles are the whole job, so the gear in the van is chosen for keys and immobilisers.
Quoted Before We Start
You hear what the job involves and what it costs on the phone, and nothing proceeds until you say yes.
We Come to You
Fully mobile from Richmond. No towing, no drop-off, no leaving your vehicle somewhere overnight.
Around the Clock
Late nights, weekends and public holidays included. Vehicle keys never fail at a convenient hour.
A Real Person Answers
Ring us and you speak to the technician who will be doing the work, not a call centre.
Keys Made On Site
Cutting and programming equipment travels with us, so most jobs are finished in a single visit.
Richmond Based, Melbourne Wide
Need a Spare Cut Before You Lose the Only Key?
Service Area
Where are you based?
Ostan Locksmiths is based in Richmond VIC 3121 and runs entirely as a mobile service, so there is no shopfront to visit. We drive to your vehicle anywhere across greater Melbourne, most often in Abbotsford, Collingwood, Fitzroy, Carlton, Kew, Hawthorn, Toorak, South Yarra, Brunswick and Camberwell.
Richmond, Victoria 3121
Mobile service across greater Melbourne
- 0410 380 354
- [email protected]
- Open 24 hours, 7 days
No Obligation Quote
Get A Free Quote
Common Questions
Car Key Cutting Questions Melbourne Drivers Ask
Straight answers to the questions we are asked most often about car key cutting in Melbourne, with no jargon and no obligation.
Can you cut a car key without the original?
Yes. Where no key exists we decode the ignition or lock barrel, or retrieve the key code tied to the VIN, then cut the blade to the factory pattern. It takes longer than a straight copy, which is precisely why a spare is worth having.
How long does cutting a spare car key take?
A mechanical copy is usually five to ten minutes. A laser cut blade takes longer to mill, and once transponder coding is added a typical visit runs 30 to 60 minutes on site.
Will a newly cut key start the engine on its own?
Only if the vehicle has no immobiliser. On a chipped car an uncoded key will turn the ignition, but the engine will crank and cut out, or refuse to fire at all, until the transponder is programmed to the vehicle.
Do I need proof of ownership?
Always. Photo identification matching current registration papers for that vehicle, before any cutting begins. No proof, no key.
Can you cut keys for motorcycles?
Yes. Edge cut bike keys are straightforward, and late model bikes carrying an immobiliser chip are coded the same way a car is.
Is a locksmith cheaper than the dealership for a spare?
Usually, and the larger saving is time. A dealership generally wants the vehicle on site and booked in for the day. We cut and code where the car is already parked.